Skip to content

lucode/home-assistant

Repository files navigation

My Home-Assistant Setup 🚀️

This Home Assistant configuration files are used mostly to control my energy management system. If you are interested in these topics, it would make most sense if you have a PV system that you can control via HA and/or an electric vehicle, with a controllable plug.

In my case I use or have connected the following hardware connected to HA.

Heating: Mitsubishi Ecodan Heat pump with Z-Wave thermostats

plus Shelly EM (Energy Meter) for power consumption tracking

image.png

More Infos: See more

Solar / PV: Victron Energy Multiplus connected via modbus

ESS means Energy Storage System and does allow the control of the battery usage.

image.png

More Infos: See more

Smart EV Charging: Plug with contactor controlled over Z-Wave

plus Shelly EM (Energy Meter) for power consumption tracking. The system allows to track a virtual State of Charge of the car battery and so an optimal charge management.

image.png

More Infos: See more

Ventilation: Controlled over Z-Wave relais

tbd

Used Software Components

  • Node-red (for almost all the automations)
  • Mitsubishi Melsec integration (to control the Heat Pump)
  • HA Energy Dashboard

Used HACS apps

  • bar-card
  • fan-control-entity-row
  • lovelace-multiple-entity-row
  • lovelace-paper-buttons-row
  • mini-graph-card
  • scheduler-card
  • simple-thermostat

DISCLAIMER

This setup can be used in your projects by you own risk. Or you can just take some inspiration from it. The Node-Red automations (flows) are relative complex and all this is still a work in progress and may have still some edges and bugs.

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published